LED Lighting Guide

Benefits of LED Lighting

Imaca Pty Ltd (Neopower) is one of Australia's premium suppliers of LED lighting. We specialise in high quality LED lighting, because not only do we believe in the massive benefits of using this new energy efficient light source, we are here to pass the savings on to you. LED lighting is a new technology and as with any type of new technology, there are limited suppliers of really high quality Australian certified LED Lights, for a reasonable price.

  1. Its going to save you a heap of cash, and we mean a heap!
  2. You wont need to change globes for 30 Years depending on your usage and you will save 90% on your lighting bills.
  3. You'll be helping save our environment
  4. We only stock world renowned and trusted brands.

Power Bills to increase

The immediate benefits you will notice running LED lighting, is the amount of savings you will have over long periods of time. With power bills estimated to increase in the next six years, you can’t afford to stick with standard and costly halogen lighting-There's simply no excuse. Your current conventional lighting is literally chewing up power, and that will most certainly be noticeable on your Electricity bills. LED Lighting will drastically reduce your power costs as well as decrease carbon emissions.

  • Power bills 'to certainly increase' after carbon price
  • Shortage of power expected in 2015-2016
  • Higher fuel, gas will also boost power bills
  • LED Lighting - guaranteed to save you money

It is a simple equation - If you continue using costly halogen and incandescent lighting in your home or place of business your power bills will continue to go through the roof. We are giving you ammunition you need to make the educated decision to make the move to LED lighting. We've done it and are already experiencing the massive benefits. What are you waiting for?

What is LED Lighting?

LED stands for Light Emitting Diode and is an electronic light source. Most lighting found in Australian homes and offices today are very inefficient costing homeowners bucket loads of money as well as emitting vast amount of CO2 into our atmosphere killing our environment.

LED lighting is a viable replacement for existing household and office lighting, just much cheaper and better for our environment. There is no reason to wait any longer, get rid of your costly Halogen lighting and switch your globes to LED today.

LED Comparison Guide - LED vs Halogen vs Incandescent

LED Halogen Incandescent CFL Approx Lumen Range
1watt LED   12-15watt    
4watt LED 25watt 25watt 5-6watt 210lm
5watt LED 30watt 30watt 7-9watt 280lm
3x3watt, 7watt LED 35-40watt 40watt 9-13watt 380-450lm
10watt, 5x3watt LED 45-50watt 60watt 13-15watt 500-800lm
12watt 60watt 75watt 18-23watt 1100lm
15watt LED 70watt 100watt 25-30watt 1500lm
25watt LED   150watt 30-52watt



LED Lighting Colours

LED Lighting can come in many different colours, the most common of these in household usage lights are Warm White, White and Cool White. The standard for many houses especially in Australia is Warm White.


LED Beam Angle - 30 degrees, 60 degrees, 100 degrees?

If you are replacing existing halogen downlights, and spacing cannot be changed a beam width of 60 degrees is more than acceptable on 2400mm ceilings. If you are installing LED Lighting during a new house build or renovation, the rule of thumb is that on taller ceilings you use a narrower beam, (30 degrees) and on a lower ceiling or bulkhead use a wider beam (60 or 100 degrees).

The beam should cross at about 1100mm above floor level, for even light distribution. On a globe with a 60 degree beam this would mean an optimum spacing of 1200mm.

So Why all the Hype About LED?

LED lighting is a huge leap in technology which is going to benefit both our environment as well as your spending for household lighting.

The below list gives you an idea of how revolutionary LED lighting is and how it will be the future of household lighting in Australia and around the world.

  • Light Life: LED lights last up to 50 times longer than a standard Halogen light globe. At 45,000 hours you only need to change the globes once every 30 years.
  • Cost Saving: LED lights run on 90% less energy than standard halogen lights, and with up to 50% of a electricity bill comprising of lighting, that’s a huge saving over a year.
  • Efficiency: LEDs produce more light per watt than incandescent bulbs.
  • Colour: LEDs can emit light of an intended color without the use of color filters that traditional lighting methods require. This is more efficient and will lower ongoing costs.
  • Size: LEDs can be very small (smaller than 2 mm2) and are easily populated onto printed circuit boards.
  • On/Off time: LEDs light up very quickly.
  • Cycling: LEDs are ideal for use in applications that are subject to frequent on-off cycling, unlike fluorescent lamps that burn out more quickly when cycled frequently, or HID lamps that require a long time before restarting.
  • Dimming: LEDs can very easily be dimmed either by Pulse-width modulation or lowering the forward current.
  • Cool light: In contrast to most light sources, LEDs radiate very little heat in the form of IR that can cause damage to sensitive objects or fabrics. Wasted energy is dispersed as heat through the base of the LED.
  • Slow failure: LEDs mostly fail by dimming over time, rather than the abrupt burn-out of incandescent bulbs.
  • Lifetime: LEDs can have a long useful life. LED life is approx. 35,000 to 50,000 hours of useful life, though time to complete failure may be longer. Fluorescent tubes typically are rated at about 10,000 to 15,000 hours, depending partly on the conditions of use, and incandescent light bulbs at 1,000–2,000 hours.
  • Shock resistance: LEDs, being solid state components, are difficult to damage with external shock, unlike fluorescent and incandescent bulbs which are fragile.
  • Focus: The solid package of the LED can be designed to focus its light. Incandescent and fluorescent sources often require an external reflector to collect light and direct it in a usable manner.
  • Toxicity: LEDs do not contain mercury, unlike fluorescent lamps.

Will LED Globes fit in my Current light fittings?

YES they will - LED Lights are made to simply replace your existing light bulbs using your existing fittings.

There are LED replacement globes for most types of standard lighting including: incandescent bulbs, downlights and spot lights.

The most common two connections in housing today are GU10 and MR16 connector types. All MR16 type globes use transformers, usually one per light - For LED globes to perform at their maximum, dedicated DC Constant Voltage LED specific drivers should be used.

The more traditional type globes being B22 Bayonet connection type globe, which has two side pins to connect into globe fittings and the E27 Edison connection type globe, which has a screw base now come in 10watt LED. Our 9 WATT E27 and B22 LED stock will fit directly into your existing B22 and E27 fittings.

LED light Fitting Types - Named connection type and diagram:

GU10 Connection Type: Two thick headed pins
like pins
MR16 Connection Type: Two nail

B22 Connection Type (Bayonet): Two side pins
Screw Connection
E27 Connection Type (Edison):



Whats the difference between GU10 and MR16?

GU10 is a direct connection to 240v - When 240v (GU10) is used, there is no need for any transformers. Dimming can be achieved by using a dimmable GU10 LED globe with a standard trailing edge dimmer.

MR16 is a 12v lighting connection which is stepped down from 240v to 12v using a transformer - Where 12v LED lighting is concerned, you need to use LED specific transformers for LED optimal performance.

LED Lighting Products

Imaca Pty Ltd (Neopower) can supply whole range of LED lighting products, it included:

LED panel light Classic downlight Focus downlight Anti-glare downlight
LED tube light LED grid light LED lamp And many more…
logo NZS2712logo-NZSlogo-AS3498logo-ITWlogo-SRCCSAA